Skip to main content

How many stern tube bearing are there and how are they connected with stern tube?Material of bearing and why white metal does not rotate with shaft?

  • Stern tube bearings generally consists of two ( fwd and aft ) bearings which are pressed in and secured to the stern tube the bearing sleeves are made of high strength ductile iron and centrifugally lined with high tin base babbitt. 
  • The bearing bore is normally finish machined to fit the propeller shaft and outside diameter is semi finished for final machining in shipyard.
Two procedures are commonly used for fitting stern tubes 
  • The stern frame is finish machined.The stern tube is pressed in and secured by bolting or welding .The stern tube is bored and bearings are then pressed into stern tube 
  •  In the second procedure, the stern tube is bored in the shop and fitted with its bearings then the entire assembly is pressed into the stern frame at shipyard. Boring of stern tube to provide an interference fit

Labels:

Comments

  1. ashtapadJanuary 4, 2022 at 1:45 AM

    I wanted to thank you for this great Information and knowledge, I definitely loved every little bit of it. I have you bookmarked your web site to check out the latest stuff you post. Your blog is eye-catching. I get pleasure from it. Thanks for sharing this beautiful piece of writing with me, get more information at ASTM A53 Grade B for more Ashtapad Overseas related information and knowledge.

    ReplyDelete
  2. VsroofingAugust 31, 2023 at 7:59 AM

    Stacks of significant data can be taken from your article about a resting pad. I'm happy that you have bestowed phenomenal information to us, It is a productive article for us. Thankful to you for sharing an article like this.mig welding machine

    ReplyDelete
  3. cruxweldAugust 31, 2023 at 8:05 AM

    It is the thing I was looking for is truly useful. It is a huge and valuable article for us. Grateful to you for sharing an article like this.Welding Machine Price

    ReplyDelete

Post a Comment

If you have any doubts.Please let me know

Popular posts from this blog

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators
9 comments
Read more

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation
7 comments
Read more

Why is a man hole door elliptical in shape?

Any opening in a pressure vessel is kept to a minimum and for a man entry an elliptical hole  is lesser in size than the corresponding circular hole. More over it is prime concern to have a  smoothed generous radius at the corners to eliminate stress concentration. Hence other  geometrical shapes like rectangle and square are ruled out.  To compensate for the loss of material in the shell due to opening, a doubler ring has to be  provided around the opening. The thickness of the ring depends on the axis length along the  dirrection in which the stresses are maximum and the thickness of the shell. It is important to  align the minor axis along the length of the vessel, as the stress in this direction is  maximum. Longitudinal stress: Pd/2t where P= pressure inside the vessel, d= diameter of the arc, t=  thickness of the shell plating  Circumferential stress: Pd/4t  More over a considerable material and weight saving is achieved as minor is along the  direction of maximum stress.
20 comments
Read more