Skip to main content

Continuous synopsis record (CSR)

  • Continuous synopsis record is a special measure under SOLAS for enhancing the maritime security at the sea.
  • According to SOLAS chapter I, all passenger andcargo ships of 500 gross-tonnage and above must have a continuous synopsis record on board.
  • The continuous synopsis record provides an onboard record of the history of the ship with respect to the information recorded therein
  • Continuous synopsis record (CSR) is issued by the administration of the ship, which would fly its flag.
Following details should be present in the continuous synopsis record (CSR)
  • Name of the ship
  • The port at which the ship is registered
  • Ship’s identification number
  • Date on which ship was registered with the state
  • Name of the state whose flag the ship is flying
  • Name of registered owner and the registered address
  • Name of registered bareboat charterers and their registered addresses
  • Name of the classification society with which the ship is classed
  • Name of the company, its registered address and the address from where safety management activities are carried out
  • Name of the administration or the contracting government or the recognized organization which has issued the document of compliance, specified in the ISM code, to the company operating the ship.
  • Name of the body which has carried out the audit to issue the document of compliance
  • Name of the administration or the contracting government or the recognized organization which has issued the safety management certificate (SMC) to the ship and the name of the body which has issued the document
  • Name of the administration or the contracting government or the recognized organization which has issued the international ship security certificate, specified in the ISPS code, to the ship and the name of the body which has carried out the verification on the basis of which the certificate was issued
  • The date of expiry of the ship’s registration with the state
  • The continuous synopsis record shall always be kept on board ship and shall be available for inspection all the time.

Comments

Popular posts from this blog

Differences between MC/MC-C and ME/ME-C engines

The electrohydraulic control mechanisms of the ME engine replace the following components of the conventional MC engine: Chain drive for camshaft Camshaft with fuel cams, exhaust cams and indicator cams Fuel pump actuating gear, including roller guides and reversing mechanism Conventional fuel pressure booster and VIT system Exhaust valve actuating gear and roller guides Engine driven starting air distributor Electronic governor with actuator Regulating shaft Engine side control console Mechanical cylinder lubricators. The Engine Control System of the ME engine comprises: Control units Hydraulic power supply unit Hydraulic cylinder units, including: Electronically controlled fuel injection, and Electronically controlled exhaust valve activation Electronically controlled starting air valves Electronically controlled auxiliary blowers Integrated electronic governor functions Tacho system Electronically controlled Alpha lubricators

Main engine interlocks

Interlocks are provided so that the engine can be started or reversed only when certain conditions have been fulfilled. When there is a remote control of engines, it is essential to have interlocks. This reduces the possibility of engine damage and any hazards to the operating personnel. Turning gear Interlock . This device prevents the engine from being started if the Turning gear is engaged. Running Direction Interlock . This prevents the fuel from being supplied if the running direction of the engine does not match the Telegraph. Starting Air Distributor in end position . This prevents starting from taking place if the shifting of the Distributor has not been completed. Main Lube. oil pressure, Piston cooling pressure, Jacket water pressure, and important parameters must be above the required minimum. Auxiliary Blower Interlock . The Auxiliary Blower is provided in case of Constant pressure turbo charging. Air Spring pressure Interlock . In case of the present generation

Why is a man hole door elliptical in shape?

Any opening in a pressure vessel is kept to a minimum and for a man entry an elliptical hole  is lesser in size than the corresponding circular hole. More over it is prime concern to have a  smoothed generous radius at the corners to eliminate stress concentration. Hence other  geometrical shapes like rectangle and square are ruled out.  To compensate for the loss of material in the shell due to opening, a doubler ring has to be  provided around the opening. The thickness of the ring depends on the axis length along the  dirrection in which the stresses are maximum and the thickness of the shell. It is important to  align the minor axis along the length of the vessel, as the stress in this direction is  maximum. Longitudinal stress: Pd/2t where P= pressure inside the vessel, d= diameter of the arc, t=  thickness of the shell plating  Circumferential stress: Pd/4t  More over a considerable material and weight saving is achieved as minor is along the  direction of maximum stress.